We spend so much time talking about designing accessible spaces. But how often do we stop to ask who gets to make the decisions about those spaces in the first place?
When an architect or interior designer begins working on a project, there are usually several people involved in shaping what that environment will become.
There are clients establishing priorities and budgets. Architects and interior designers developing plans. Engineers evaluating technical requirements. Contractors coordinating construction. And sometimes, accessibility consultants reviewing whether the design meets applicable standards.
But there's a question I think the design industry needs to be asking more often.
Where are the disabled professionals in these conversations?
Not just the people reviewing accessibility requirements. Not just the disabled individuals brought in toward the end of a project to provide feedback.
I'm talking about disabled architects, interior designers, researchers, consultants, and community members whose knowledge could influence the design from the very beginning.
Because there's an important difference between creating environments for disabled people and creating them with disabled people.
And that difference deserves considerably more attention.
What Does Nothing About Us Without Us Actually Mean?
"Nothing About Us Without Us" is a principle widely embraced by the disability rights movement.
At its foundation is a straightforward idea: decisions affecting disabled people should include disabled people.
It's about participation, autonomy, representation, and recognizing that the people who experience barriers firsthand have valuable knowledge about how those barriers affect their lives.
But I think there's an important distinction we sometimes overlook when discussing inclusion.
Being present isn't necessarily the same as having influence.
An organization can invite a disabled person to a meeting. A design team can request feedback from wheelchair users. A company can assemble an accessibility advisory group.
Those things can be valuable.
But if the major decisions have already been made, if recommendations are dismissed without meaningful consideration, or if participation exists primarily to demonstrate that consultation happened, how much influence did disabled people actually have?
The question isn't simply whether disabled people were included.
It's whether their involvement had the opportunity to change the outcome.
And in the design industry, that distinction matters enormously.
I Understand Both Sides of the Design Process
I'm an NCIDQ-certified interior designer, a certified trauma recovery practitioner, a disability advocate, and a wheelchair user.
My professional background gives me a somewhat unusual perspective on accessibility.
I developed my professional design knowledge before becoming a wheelchair user.
I understand spatial planning, construction documentation, architectural products, accessibility requirements, and the coordination involved in bringing a design from concept to reality.
I've worked on large-scale commercial projects and understand the responsibilities designers carry when making decisions that affect how people use an environment.
But becoming disabled changed the way I experienced the spaces around me.
Things that once seemed straightforward on a floor plan became much more complicated in everyday life.
I started noticing how furniture placement affected my ability to maneuver. How something as simple as the location of a kiosk could determine whether I could independently complete a transaction. How a technically accessible entrance might still require an unnecessarily complicated route.
And how seemingly small design decisions could create barriers that weren't immediately obvious from reviewing a drawing.
My understanding of design didn't disappear when I became disabled.
My perspective expanded.
I'm also autistic and live with chronic illnesses that affect my physical functioning, energy, and ability to navigate different environments.
That means I experience accessibility through several different lenses.
Mobility. Sensory processing. Chronic pain. Fatigue. Fluctuating physical capacity.
My education in trauma recovery has also influenced how I understand the relationship between people and their environments.
Lighting, acoustics, privacy, predictability, and the ability to make choices about our surroundings can all affect how someone experiences a space.
An environment might satisfy its technical accessibility requirements and still be overwhelming, exhausting, or uncomfortable for someone with sensory sensitivities or a history of trauma.
And what works for one person might not work for another.
I don't share this because I believe my experiences represent every disabled person.
They don't.
I share it because professional design knowledge and lived disability experience can inform one another in ways that deepen our understanding of accessibility.
And imagine what could happen if more of those perspectives were meaningfully included throughout the design process.
Who Traditionally Gets a Seat at the Design Table?
Think about how a typical architectural or interior design project unfolds.
During programming, the project team identifies goals, requirements, budgets, and the intended uses of the space.
During schematic design, the team begins establishing circulation patterns, spatial relationships, and overall design concepts.
As the project moves into design development, decisions become more specific. Furniture, materials, equipment, building systems, and other details begin taking shape.
By the time construction documents are being prepared, many significant decisions have already been established.
Now consider when disabled people are typically invited into that process.
Sometimes an accessibility consultant reviews the project to evaluate compliance.
Sometimes disabled end users are invited to provide feedback.
Sometimes a concern isn't raised until someone encounters a barrier in the completed environment.
But what would happen if disabled professionals and community members were involved during programming?
What if their perspectives helped establish the project's needs before anyone began developing the floor plan?
What if accessibility wasn't something we evaluated after the major decisions were made, but something that influenced those decisions from the beginning?
This is where I believe our industry has an opportunity to make meaningful changes.
Because who participates in the design process influences what gets prioritized in the finished environment.
Technical Compliance and Lived Experience Are Not the Same Thing
I want to be clear about something.
Accessibility codes and standards are essential.
They establish important requirements intended to support access to our built environments.
Design professionals need to understand those requirements, and accessibility consultants provide valuable technical expertise.
But technical compliance and lived experience aren't interchangeable.
Someone can have extensive knowledge of accessibility regulations without personally experiencing the barriers those regulations are intended to address.
Likewise, someone can have extensive lived experience navigating inaccessible environments without knowing the technical language of building codes.
Neither form of knowledge makes the other irrelevant.
Ideally, they work together.
Consider a healthcare reception area.
A design team might provide accessible circulation, a compliant reception counter, appropriate door clearances, and accessible seating.
On paper, the space appears to meet the applicable requirements.
But a wheelchair user might recognize that the way the queue forms makes the accessible counter difficult to approach.
Someone living with POTS or another chronic condition might explain that standing in line for several minutes can cause dizziness, pain, or significant fatigue.
An autistic person might describe how overhead lighting, multiple televisions, crowded seating, and unpredictable noise make the waiting area difficult to tolerate.
Someone with PTSD might explain why privacy, clear communication, and the ability to choose where to wait can make a meaningful difference.
None of these experiences applies universally to everyone with those conditions.
But each provides information that might not emerge from reviewing the floor plan alone.
And if those conversations happen early enough, the design team has an opportunity to respond.
Perhaps the queuing arrangement changes.
Perhaps additional seating is incorporated.
Perhaps quieter waiting areas or alternative check-in procedures become part of the plan.
Perhaps the lighting and acoustics receive greater attention.
That is what it means to design with people.
Not simply asking whether a nearly completed design works for them, but allowing their knowledge to influence what the design becomes.
Disability Is Not a Small, Separate Population
One of the assumptions I believe we need to challenge is the idea that accessibility is a specialized concern affecting a relatively small group of people.
According to the Centers for Disease Control and Prevention's 2022 disability data, published in 2024, more than one in four adults in the United States reported having a disability.
That's approximately 70 million people.
And disability encompasses an enormous range of experiences.
People with mobility disabilities. Sensory disabilities. Cognitive and neurological disabilities. Chronic health conditions. People whose support needs fluctuate. People whose disabilities are visible and people whose disabilities are not.
Some people have been disabled since childhood.
Others become disabled through illness, injury, or aging.
And people's needs can change over time.
Yet so much of our built environment still appears to be designed around an imagined standard user.
Someone who can walk long distances without difficulty. Stand while waiting. Reach everything at standing height. Navigate noisy environments. Process visual information easily. And move through public spaces without requiring additional support.
Everyone else becomes an exception that needs to be accommodated.
But disabled people are not an exception to the population we're designing for.
We are part of that population.
We're employees, business owners, students, parents, customers, patients, community members, and design professionals ourselves.
Accessibility should not be approached as an optional feature added for a small group of people.
It should be part of how we understand the people who will use our environments in the first place.
Disabled People Are Professionals, Not Just End Users
There's another piece of this conversation that I believe deserves more attention.
When we talk about involving disabled people in design, the discussion often centers on collecting feedback from disabled end users.
That feedback matters.
But disabled people are also qualified professionals working within the industries responsible for creating our environments.
We're architects, interior designers, engineers, researchers, educators, accessibility consultants, and project managers.
We have technical knowledge, professional credentials, education, experience, and specialized skills.
Some of us also have lived disability experiences that influence how we approach our work.
Those experiences can add another dimension to our professional understanding.
But disabled professionals shouldn't be invited into design conversations only because we're disabled.
We belong in those conversations because we're qualified to contribute.
Becoming a wheelchair user didn't erase my understanding of design development, spatial planning, technical coordination, or accessibility requirements.
It changed the perspective I bring to that knowledge.
And I think it's important that we recognize the difference.
Disability doesn't automatically make someone an accessibility expert, just as being nondisabled doesn't automatically mean someone lacks accessibility knowledge.
Expertise develops through professional education, training, research, practice, and lived experience.
When those forms of knowledge come together, they can strengthen the decisions being made.
But that only happens when disabled professionals have meaningful opportunities to participate.
And meaningful participation requires more than being invited to share a personal story.
It requires being recognized as a professional whose recommendations, judgment, and expertise deserve consideration.
We Need to Change Who Gets to Influence the Process
I don't believe every design professional needs to personally experience disability to create more accessible environments.
And I don't believe any one disabled person can represent the full range of disability experiences.
That's precisely why collaboration matters.
Design has always required people with different areas of expertise to work together.
We don't expect interior designers to replace structural engineers.
We don't expect architects to perform every responsibility of a contractor.
We understand that different perspectives and disciplines contribute to the success of a project.
Why should disability expertise be treated differently?
Why should the knowledge of disabled professionals be sought only when someone identifies an accessibility problem?
Why aren't more disabled professionals included when the initial project goals are established?
Why are accessibility conversations so often framed around minimum requirements rather than the everyday experiences of the people who will actually use a space?
And perhaps most importantly, what might change if disabled people had greater opportunities to influence the decisions being made?
These are questions I believe the design industry needs to take seriously.
Because accessibility isn't simply about getting a wheelchair through a doorway.
It's about whether people can navigate, participate, communicate, work, and exist within environments with dignity and as much autonomy as possible.
And creating those environments requires us to think beyond technical compliance.
Nothing About Us Without Us Means More Than Representation
I want to return to the principle that inspired this conversation.
Nothing About Us Without Us.
It doesn't mean inviting one disabled person to represent every possible disability.
It doesn't mean abandoning professional design standards or ignoring the practical constraints of a project.
And it doesn't mean every recommendation can or should automatically be implemented.
It means recognizing that disabled people have valuable knowledge about the environments we're creating.
It means inviting that knowledge into the process while decisions can still be influenced.
It means considering who holds professional authority, whose feedback is taken seriously, and whose experiences shape the final outcome.
And it means recognizing disabled professionals as potential colleagues, collaborators, consultants, and leaders.
We cannot build a truly inclusive design industry while excluding disabled people from the process of shaping it.
We need to think about more than the spaces we're creating.
We need to think about who has the opportunity to create them.
And that's the conversation I want to continue.
Continuing the Conversation
This article is the first in my Nothing About Us Without Us blog series, adapted from my workshop, Nothing About Us Without Us: Bringing Disabled Professionals Into the Design Process.
Throughout this series, I'll be exploring how traditional design processes can exclude disabled perspectives, why technical accessibility doesn't always translate into real-world usability, and how the design industry can create more meaningful opportunities for disabled professionals.
In the next article, we'll explore an important distinction:
Designing for disabled people isn't the same as designing with disabled people.
And the difference can fundamentally change how an environment functions.
Interested in Bringing This Conversation to Your Organization?
I'm Monica Munson, an NCIDQ-certified interior designer, certified trauma recovery practitioner, disability advocate, and founder of Restorative Healing Haven.
My work brings together professional design expertise, lived disability experience, and a trauma-informed understanding of how environments affect the people who use them.
I offer accessibility consulting, educational workshops, and speaking engagements for organizations interested in moving beyond minimum compliance toward more inclusive design practices.
I'm currently booking a limited number of consulting and speaking engagements.
If this is a conversation you'd like to bring to your design firm, organization, or professional community, I'd welcome the opportunity to connect.
Visit Restorative Healing Haven to learn more and get in touch.